This device allows you complete control of your pool and spa functions. You can activate any pool/spa function by remote control using an automation remote controller or a phone responder. You can also pre-program any pool /spa operation. For example, maybe you would like your home automation controller to tell your pool to backflush the system and turn on the pool cleaner every Friday morning at 6:00 a.m. Whatever you would like to do is a simple thing for this superior pool panel controller. You can do it from inside your home, in your car, or from anywhere in the world.
Features:
Automatic heater cool down
Automatic filter pump shut-off timer
Cleaner pump protection
Non-volatile memory
Also has manual control SPA MODE
A single X10 ON command activates your spa and performs the following:
1) Sends a command to turn ON your filter pump,
2) Supplies 24 VAC to rotate the suction and return valve actuators (Compool or Jandy),
3) Energizes a heater relay to turn ON the pool/spa heater.
While in the Spa Mode, an X10 code activates a heat boost relay which turns ON the pool/spa heater for two minutes and then automatically turns it OFF. The controller automatically reverts back to Pool Mode after 1 to 16 hours (programmable). POOL MODE
A single X10 OFF command activates the Pool Mode and performs the following:
1) A filter pump cool-down period is initiated,
2) 24 VAC is supplied to rotate the suction and return valve actuators to the pool position, and
3) It de-energizes the pool/spa heater to turn OFF the heater. This professional pool and spa controller is a must for your automated home!
The pool and spa controller comes with the following:
24 VAC, 1000 mA Power Adapter
6 ft. RJ-1 modular jack cord for power line interface
NOTE: The power line interface, XPPSC05, is required, and sold separately
Manufacturer: X10 Wireless Technology, Inc
Manufacturer warranty: 1 year
Product questions: 800-442-5138
|
